类别档案:新闻

How to Choose the Right High Pressure Valve for Your Application

最大高压阀设计成在15,500psi的压力下安全地操作,用于1½“中等压力阀,高达超过101,000psi的超高压阀。高压阀用于调节各种流体处理操作的流动,包括各种行业,包括航空航天,汽车,军事和采矿业。为您的应用选择最佳的高压阀是至关重要的。

There are many factors to consider when choosing a high pressure valve. Below, we highlight some key factors to consider when choosing the right high pressure valve for your application.

Factors to Consider When Evaluating Your High Pressure Valve Needs

Important factors to consider when evaluating whether a particular high pressure valve is right for your fluid handling application include:

  • 过程中:阀门应该能够处理过程介质,无论是气体,液体,蒸汽形式,惰性,磨料还是腐蚀性,热还是冷。
  • Pressure rating:It should be rated to handle the range of pressures expected in operation. Consider upstream and downstream pressure for the maximum, normal, and minimum flow rates.
  • Temperature:The valve should be rated to handle process medium temperatures.
  • Flow rate:A high pressure valve should be properly sized to ensure it has the proper flow rate capacity.
  • 连接类型和大小:It should have a connection type and size that fits the inlet/outlet piping.
  • Valve style:您需要手动阀门或空气驱动阀门吗?如果空气运行,阀门是否应空气开放(常闭)或空气接近(常开)?
  • 建材:高压阀应由可承受工艺介质和操作条件(温度,压力,流量等)的材料构成。例如,不锈钢适用于涉及腐蚀性材料的流体处理操作。
  • 应用:它应该适合在系统中实现。

High-Pressure Valve Solutions at MAXPRO®

在MaxPro®技术,我们的MaxImator®系列包括一188体育网系列手动和空气驱动阀门。主要功能包括:

  • Non-rotating, rising stem design
  • 316 stainless steel wetted parts with 17-4 PH stainless steel stem
  • Metal-to-metal seating for bubble-tight shut-off
  • Optional reversible and replaceable valve seat is available

合并,这些功能导致耐用和持久的阀门解决方案,用于重复打开和关闭循环操作。我们的通风阀门配有活塞式的空气执行器,通常是封闭或常开的。这种设计提供了更好的操作和使用寿命。另外,将致动器安装在轭上的静止保持与过程流体分离,这有助于茎位置指示和杆置换。

我们的M188体育网axImator®线包括:

  • 中压针阀:额定为22,500 psi,可在1/4,3/8“,9/16”3/4“和1”连接尺寸。1½“阀门被评定到15,500 psi
  • 高压针阀:rated to 65,000 psi and available in 1/4″, 3/8″, and 9/16″ connection sizes
  • 超高压阀:额定为101,000 psi,可于1/4“,5/16”,3/8“和9/16”连接尺寸

我们的中压和高压阀门都有六个身体图案:

  • 双向
  • 双角度
  • 双角度with replaceable seat
  • 3-way/2-on-pressure
  • 3路/ 1负压
  • 3-way/2-stem manifold

Contact the High Pressure Equipment Experts at MAXPRO Today

需要高压阀门用于液体处理操作?转向MaxPro®的设备专家!我们的广泛选择优质阀门,配件和管材,适用于许多高压应用。有关我们最大值高压的更多信息阀门fittingsand管道今天联系我们orrequest a quote

涉及空气放大器设计的因素

空气放大器工业设备设计to increase air pressure to improve pneumatic tool operation. When centralized air pressure systems are insufficient to power air-driven tools, air amplifiers can fill localized demand. Depending on the type of unit, air amplifiers have various pressure and flow capabilities, ranging anywhere from 30 to 4,350 PSI. Because there is such a wide selection of air amplifier designs available on the market, it is important to carefully select the right one for your intended application.

Air Amplifiers

空气放大器如何工作

Air-driven air amplifiers use the principle of differential areas to generate pressure. By having a higher ratio of inlet to outlet piston areas, air amplifiers utilize shop air, use some of that air as power to operate the unit (called the ‘drive air’), and intensifies the remainder of the inlet air into pressurized output. Shop air utilizes a four-way spool valve to affect cycling, then exhausts the drive air. There are two main ways MAXPRO® Air Amplifier Systems achieve this:

  1. DLA系列:大型空气活塞驱动较小的空气活塞以产生更高的压力水平。
  2. PLV Series: These units have two fixed area pistons. During cycling, the air amplifier utilizes one of the pistons to effectively double the incoming air pressure.

MaxPro®气体放大器系统包括空气控制封装188博,放大器,带排水阀的空气储罐,压力阀和出口压力调节器,带仪表。

Sizing Air Amplifiers

Consider these factors as you determine the right air amplifier for your application:

Airflow

Airflow demands are based on the application, environment, and specific equipment involved in each case. Parameters to consider:

  • 可用的入口空气驱动器流量和压力
  • Required outlet pressure
  • 出口压力所需的流动

Applications Requirements

  • What is the highest flow and pressure needed?
  • 描述典型的机器循环要求

Pressure

弄清楚最高和最低空气压力要求至关重要。请记住,您需要存储比提供气流所需的Delta P所需的压力更高的压力。

Other Considerations

  • 占空比(间歇性需求或24/7操作?)
  • Environment (hot, cold, inside, outside, clean, dirty?)
  • Future expansion of production line (will more volume be needed in the future?)
  • 未来需要更高的压力和流量?
  • Distance to work (line lengths can become a factor for pressure and flow)

来自MaxPro的空气放大器

在MaxPro,我们专注于帮助我们的客户找到右空气放大器和空气功率系统188博超过25年。客户服务是我们的首要任务。我们的知识渊博的工程师和销售人员随时准备帮助您选择最佳MaxPro Air Alluption系统以满足您的要求。今天联系我们了解有关我们库存或的更多信息browse our catalog online

MaxPro资源:空气放大器和他们的工作方式

New Setting Up a Pressure Test Cube Video Available

设置压力测试立方体Video Available!

设置压力测试立方体

Learn to assemble a high pressure coned and threaded connection using a MAXPRO® Power Cube, Data Logger and custom-made coned and threaded tubing nipple made from in-stock tubing.

要查看我们的更多视频,请单击here

Our Coning & Threading Video

Our Coning & Threading Video is now available in Chinese & Japanese!

The video is also available in Arabic, French, German and Spanish!

请在下面检查一下或单击here更多我们的视频!

MaxPro锥形和穿线机

Coning and Threading Machine Video in (Arabic)

绑带和穿线机视频(中文)

(法语)的皮肤和穿线机视频

Coning and Threading Machine Video in (German)

绑带和穿线机视频(日语)

Coning and Threading Machine Video in (Spanish)

自定义突发测试系统视频

自定义突发测试系统视频Available!


custom-burst-test-system

Custom Burst Test System

Custom Burst Test System featuring GoPro® footage of high-pressure sample bursting. This system features the GX60 Maximator® Liquid Pump.

要查看我们的更多视频,请单击here